5305-01-070-4793, SCREW,EXTERNALLY RELIEVED BODY

5905-01-070-4789 RESISTOR,FIXED,WIRE WOUND,INDUCTIVE

5305-01-070-4794 SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-01-070-4793

Federal Supply Class:
5305

National Item Identification Number:
010704793

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

724-352462-000

90073

CMC ELECTRONICS INC

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	0.500 INCHES NOMINAL
FIRST DIAMETER FROM HEAD	0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD DIAMETER	0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
HEAD HEIGHT	0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE	PAN
INTERNAL DRIVE STYLE	CROSS RECESS TYPE 1
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 300 SERIES FED SPEC SINGLE MATERIAL RESPONSE OR 66 300 SERIES FED STD SINGLE MATERIAL RESPONSE OR COMP 16-18 ASSN STD SINGLE MATERIAL RESPONSE OR COMP 18-8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL CORROSION RESISTING OVERALL
NOMINAL THREAD DIAMETER	0.112 INCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH	40
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL COARSE (UNC)

Click here to Register for Free 30-day Trial