5305-01-127-2887, SCREW ASSEMBLY,PANEL

National Stock Number:
5305-01-127-2887

Federal Supply Class:
5305

National Item Identification Number:
011272887

Description:
SCREW ASSEMBLY,PANEL

Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.

Manufacturer Information:

DRBH7500-4-A-1	0HDW7	HUCK INTERNATIONAL, INC.
DRBH7500-4-A-1	97928	HUCK INTL INC

Techincal Specification:

THREAD SERIES DESIGNATOR	UNC
NOMINAL THREAD DIAMETER	0.112 INCHES
THREAD QUANTITY PER INCH	40
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.266 INCHES NOMINAL
FASTENER LENGTH	0.556 INCHES MINIMUM AND
	0.606 INCHES MAXIMUM
MATERIAL	IRON ALLOY 660 FASTENER
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE HEAD
	QQ-W-423 FED SPEC SINGLE MATERIAL RESPONSE SPRING
	QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF
	AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
SURFACE TREATMENT	ANODIZE HEAD
	PASSIVATE SPRING
	ANODIZE STAND-OFF
	PASSIVATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625 TYPE 1 CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE HEAD
	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING
	MIL-A-8625 TYPE 1 CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF
	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
MINIMUM TENSILE STRENGTH	140000 POUNDS PER SQUARE INCH
HEAD STYLE	PAN NO. 2
HEAD DIAMETER	0.205 INCHES MINIMUM AND
	0.219 INCHES MAXIMUM
HEAD HEIGHT	0.058 INCHES MINIMUM AND
	0.068 INCHES MAXIMUM
INTERNAL DRIVE STYLE	SLOT
MATERIAL ACCOMMODATED THICKNESS	0.032 INCHES MINIMUM AND
	0.062 INCHES MAXIMUM
PART NAME ASSIGNED BY CONTROLLING AGENCY	NAVY SPECIAL PROJECT

Click here to Register for Free 30-day Trial