5305-01-162-5713, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-01-162-5713

Federal Supply Class:
5305

National Item Identification Number:
011625713

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

MS3369B-408	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS369B408	96900	HARDMAN INC

Techincal Specification:

THREAD SERIES DESIGNATOR	UNJF
NOMINAL THREAD DIAMETER	0.250 INCHES
THREAD QUANTITY PER INCH	28
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.277 INCHES MINIMUM AND
	0.328 INCHES MAXIMUM
FASTENER LENGTH	0.918 INCHES MINIMUM AND
	0.938 INCHES MAXIMUM
MATERIAL	STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MINIMUM TENSILE STRENGTH	90000 POUNDS PER SQUARE INCH
HEAD STYLE	CROWNED HEXAGON
HEAD HEIGHT	0.126 INCHES MINIMUM AND
	0.141 INCHES MAXIMUM
WIDTH BETWEEN FLATS	0.430 INCHES MINIMUM AND
	0.439 INCHES MAXIMUM
INTERNAL DRIVE STYLE	SLOT
GRIP LENGTH	0.500 INCHES MINIMUM AND
	0.516 INCHES MAXIMUM
GRIP DIAMETER	0.2487 INCHES MINIMUM AND
	0.2492 INCHES MAXIMUM
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
	32.0 MICROINCHES GRIP
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	0.823 INCHES MINIMUM AND
	0.843 INCHES MAXIMUM FIRST HOLE
SHANK UNTHREADED HOLE DIAMETER	0.076 INCHES MINIMUM AND
	0.086 INCHES MAXIMUM FIRST HOLE
SPECIAL FEATURES	RETAINING ELEMENTS IN SHANK
SPEC/STD CONTROLLING DATA
MANUFACTURERS CODE	96906
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE	MS3369B-408

Click here to Register for Free 30-day Trial