|
|
|
National Stock Number:
5305-01-271-6473
Federal Supply Class:
5305
National Item Identification Number:
012716473
Description:
SCREW ASSEMBLY,PANEL
Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
|
Manufacturer Information:
| 4002659-44 | 07187 | HONEYWELL INTERNATIONAL INC. | | CPF7900S8A4.5 | 0HDW7 | HUCK INTERNATIONAL, INC. | | ST1183-44 | 58794 | FASTENER TECHNOLOGY CORP | | CPF7900S8A4.5 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD DIAMETER | 0.164 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.203 INCHES NOMINAL | | FASTENER LENGTH | 0.722 INCHES MAXIMUM | | MATERIAL | STEEL COMP 302 OR | | STEEL COMP 304 OR | | STEEL COMP 305 OR | | STEEL COMP 309 OR | | STEEL COMP 310 OR | | STEEL COMP 316 OR | | STEEL COMP 347 PRIMARY WASHER | | COPPER ALLOY STAND-OFF | | STEEL COMP 302 OR | | STEEL COMP 304L OR | | STEEL COMP 316L OR | | STEEL COMP 317 OR | | STEEL COMP 321 OR | | STEEL COMP 322 OR | | STEEL COMP 324 OR | | STEEL COMP 347 FASTENER | | SURFACE TREATMENT | PASSIVATE PRIMARY WASHER | | CADMIUM STAND-OFF | | PASSIVATE FASTENER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 1 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF | | HARDNESS RATING | 34.0 ROCKWELL C MINIMUM AND | | 38.0 ROCKWELL C MAXIMUM FASTENER | | HEAD STYLE | PAN | | HEAD DIAMETER | 0.205 INCHES MINIMUM AND | | 0.219 INCHES MAXIMUM | | HEAD HEIGHT | 0.090 INCHES MINIMUM AND | | 0.100 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE II | | MATERIAL ACCOMMODATED THICKNESS | 0.147 INCHES MINIMUM |
|
|