5305-01-367-9811, SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-01-367-9811

Federal Supply Class:
5305

National Item Identification Number:
013679811

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

71A217-1

22887

OAI ELECTRONICS, LLC

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.344 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD	0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
HEAD DIAMETER	0.355 INCHES MINIMUM AND 0.395 INCHES MAXIMUM
HEAD HEIGHT	0.420 INCHES MINIMUM AND 0.460 INCHES MAXIMUM
HEAD STYLE	KNURLED NO. 4
INTERNAL DRIVE STYLE	SLOT
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A581 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 303 OVERALL
NOMINAL THREAD DIAMETER	0.190 INCHES
POINT CHAMFER ANGLE	85.0 DEGREES MINIMUM AND 95.0 DEGREES MAXIMUM
POINT DIAMETER	0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
POINT LENGTH	0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM
POINT STYLE	CONE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35,TY 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNF

Click here to Register for Free 30-day Trial