5305-01-603-1094, SCREW,MACHINE

National Stock Number:
5305-01-603-1094

Federal Supply Class:
5305

National Item Identification Number:
016031094

Description:
SCREW,MACHINE

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.

Manufacturer Information:

A3013114-38

80063

US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR

Techincal Specification:

BEARING SURFACE OF HEAD SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
BEARING SURFACE OF HEAD SURFACE TREATMENT	PASSIVATE
COUNTERSINK ANGLE	90.0 DEGREES MINIMUM AND 92.0 DEGREES MAXIMUM
FASTENER LENGTH	31.20 MILLIMETERS NOMINAL
HEAD DIAMETER	3.60 MILLIMETERS MINIMUM
HEAD STYLE	FLAT COUNTERSUNK
HEAD SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
HEAD SURFACE TREATMENT	PASSIVATE
INTERNAL DRIVE STYLE	CROSS RECESS TYPE II
PART NAME ASSIGNED BY CONTROLLING AGENCY	SCREW, MACHINE-FLAT HEAD, 90 DEGREE CROSS-RECESSED (METRIC)
MINIMUM TENSILE STRENGTH	80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	2.2 MILLIMETERS
SCREW MATERIAL DOCUMENT AND CLASSIFICATION	FED-STD-66 FED STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SCREW SURFACE TREATMENT	PASSIVATE
SCREW MATERIAL	STEEL CORROSION RESISTING
SHANK SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SHANK SURFACE TREATMENT	PASSIVATE
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	30.0 MILLIMETERS NOMINAL
THREAD PITCH IN MILLIMETERS	0.45
THREAD SERIES DESIGNATOR	M

Click here to Register for Free 30-day Trial