5895-01-573-8606 INSTALLATION KIT,ELECTRONIC EQUI 3010-01-620-1097 BASIC ASSEMBLY ROD

National Stock Number:
5305-01-620-0225

Federal Supply Class:
5305

National Item Identification Number:
016200225

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.


Manufacturer Information:
NAS4405-1980205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE


Techincal Specification:
SINGLE SHEAR STRENGTH95000 POUNDS PER SQUARE INCH
MATERIALSTEEL COMP 4340 OR STEEL COMP 8740 OVERALL
NOMINAL THREAD DIAMETER0.312 INCHES
THREAD LENGTH0.438 INCHES NOMINAL
GRIP LENGTH1.177 INCHES MINIMUM AND 1.197 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OR AMS 6322 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
HEAD STYLEFLAT COUNTERSUNK
THREAD QUANTITY PER INCH24
FASTENER LENGTH1.625 INCHES NOMINAL
HEAD DIAMETER0.575 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
THREAD CLASS3A
INTERNAL DRIVE STYLETRI-WING RECESS
COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
THREAD DIRECTIONRIGHT-HAND
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416, TY II, CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SPECIFICATION/STANDARD DATA80205-NAS 4400 THRU 4416 NATIONAL STD/SPEC
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
SURFACE TREATMENTCADMIUM OVERALL
GRIP DIAMETER0.311 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNJF


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us