|
|
|
National Stock Number:
5306-00-033-4902
Federal Supply Class:
5306
National Item Identification Number:
000334902
Description:
BOLT,MACHINE
Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.
|
Manufacturer Information:
| 237229 | 4MJR3 | PARTS LIFE INC | | 237229 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2416 ASSN STD ALL TREATMENT RESPONSES OVERALL | | HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND | | 38.0 ROCKWELL C MAXIMUM OVERALL | | MINIMUM TENSILE STRENGTH | 136000 POUNDS PER SQUARE INCH | | THREAD DIRECTION | RIGHT-HAND | | FASTENER LENGTH | 0.615 INCHES MINIMUM AND | | 0.635 INCHES MAXIMUM | | MATERIAL | STEEL COMP 601 OVERALL | | THREAD LENGTH | 0.512 INCHES MINIMUM AND | | 0.532 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD DIAMETER | 0.312 INCHES | | THREAD QUANTITY PER INCH | 24 | | THREAD CLASS | 1A | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6304 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | NICKEL AND | | CADMIUM OVERALL | | HEAD HEIGHT | 0.271 INCHES MINIMUM AND | | 0.291 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.492 INCHES MINIMUM AND | | 0.502 INCHES MAXIMUM | | HOLE CONFIGURATION STYLE | HEXAGON LONGITUDINAL HOLE | | HOLE TYPE | DRILLED | | HOLE QUANTITY | 6 | | HOLE DIAMETER | 0.070 INCHES NOMINAL | | SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD | | 32.0 MICROINCHES GRIP | | FEATURES PROVIDED | FINISHED HEAD | | SPECIAL FEATURES | DUE TO CRITICAL FEATURES, TOLERANCES, FIT RESTRICTIONS, MATERIAL PROPERTIES & MANUFACTURING PROCESS. FAILURE COULD RESULT IN LOSS OR SUBSTANTIAL DAMAGE TO THE WEAPON SYSTEM, DEATH OR SERIOUS INJURY | | CRITICALITY CODE JUSTIFICATION | FEAT | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 77445 | | DESIGN CONTROL REFERENCE | 237229 |
|
|