4310-00-055-1292 TUBE Index 2995-00-055-1296 DETECTOR,METALLIC PARTICLE

National Stock Number:
5306-00-055-1293

Federal Supply Class:
5306

National Item Identification Number:
000551293

Description:
BOLT,MACHINE

Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.


Manufacturer Information:
P1180105812HORST ENGINEERING & MANUFACTURING CO
P1180177445RTX CORPORATION


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER3.689 INCHES MINIMUM AND 3.710 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH3.865 INCHES MINIMUM AND 3.885 INCHES MAXIMUM
FEATURES PROVIDEDFINISHED HEAD
GRIP LENGTH3.290 INCHES MINIMUM AND 3.320 INCHES MAXIMUM
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.303 INCHES MINIMUM AND 0.323 INCHES MAXIMUM
HEAD STYLEHEXAGON
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 8740 OVERALL
NOMINAL THREAD DIAMETER0.500 INCHES
SHANK UNTHREADED HOLE DIAMETER0.094 INCHES MINIMUM AND 0.101 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH63.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONAMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.545 INCHES MINIMUM AND 0.595 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
THREAD QUANTITY PER INCH13
WIDTH BETWEEN FLATS0.725 INCHES MINIMUM AND 0.750 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us