| THREAD SERIES DESIGNATOR | UNF |
| NOMINAL THREAD DIAMETER | 0.164 INCHES |
| THREAD QUANTITY PER INCH | 36 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.250 INCHES MINIMUM |
| FASTENER LENGTH | 0.719 INCHES NOMINAL |
| MATERIAL | STEEL COMP 8740 OR |
| STEEL COMP 8630 OR |
| STEEL COMP 8735 OR |
| STEEL COMP 4140 OR |
| STEEL COMP 4130 OR |
| STEEL COMP 4037 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OR |
| MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OR |
| MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OR |
| MIL-S-5626 MIL SPEC 4TH MATERIAL RESPONSE OR |
| MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OR |
| MIL-S-8695 MIL SPEC 6TH MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM AND |
| CHROMATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SINGLE SHEAR STRENGTH | 1500 POUNDS PER SQUARE INCH |
| HEAD STYLE | BUTTON |
| HEAD DIAMETER | 0.359 INCHES MINIMUM AND |
| 0.391 INCHES MAXIMUM |
| HEAD HEIGHT | 0.078 INCHES MINIMUM AND |
| 0.109 INCHES MAXIMUM |
| INTERNAL DRIVE STYLE | SLOT |
| GROOVE DIAMETER | 0.120 INCHES NOMINAL |
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.594 INCHES NOMINAL FIRST HOLE |
| SHANK UNTHREADED HOLE DIAMETER | 0.070 INCHES MINIMUM AND |
| 0.080 INCHES MAXIMUM FIRST HOLE |
| DEPARTURE FROM CITED DOCUMENT | THREAD T PER MIL-S-7742 EXCEPT MAJOR DIA IS NOT TO EXCEED MAX ALLOW BOLT SHANK DIA |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 88044 |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | AN22-11 |