| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 4.859 INCHES MINIMUM AND 4.891 INCHES MAXIMUM FIRST HOLE |
| FASTENER LENGTH | 5.016 INCHES MINIMUM AND 5.062 INCHES MAXIMUM |
| FEATURES PROVIDED | FINISHED HEAD |
| GRIP LENGTH | 4.547 INCHES MINIMUM AND 4.578 INCHES MAXIMUM |
| HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD HEIGHT | 0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM |
| HEAD STYLE | HEXAGON |
| HOLE CONFIGURATION STYLE | HEXAGON FLATS |
| HOLE DIAMETER | 0.046 INCHES NOMINAL |
| HOLE QUANTITY | 1 |
| HOLE TYPE | DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 FED SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 FED SPEC 2ND MATERIAL RESPONSE OR MIL-S-6050 FED SPEC 3RD MATERIAL RESPONSE OR AMS 6300 ASSN STD 4TH MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 4037 OVERALL |
| MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.250 INCHES |
| SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE |
| WIDTH BETWEEN FLATS | 0.428 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.438 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| THREAD QUANTITY PER INCH | 28 |
| THREAD SERIES DESIGNATOR | UNF |