| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.818 INCHES MINIMUM AND 1.838 INCHES MAXIMUM FIRST HOLE |
| FASTENER LENGTH | 2.110 INCHES MINIMUM AND 2.140 INCHES MAXIMUM |
| HEAD DIAMETER | 0.740 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| HEAD HEIGHT | 0.407 INCHES NOMINAL |
| HEAD STYLE | BEVEL-CONICAL |
| HOLE CONFIGURATION STYLE | ROUND |
| HOLE DIAMETER | 0.070 INCHES NOMINAL |
| HOLE QUANTITY | 6 |
| HOLE TYPE | DRILLED |
| INTERNAL DRIVE STYLE | HEXAGON |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR QQ-S-634 FED SPEC 4TH MATERIAL RESPONSE OR QQ-S-624 FED SPEC 5TH MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP E4340 OR STEEL COMP 8740 OR STEEL COMP 6150 OR STEEL COMP 3140 OR STEEL COMP 3135 OVERALL |
| MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.438 INCHES |
| SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM AND 0.111 INCHES MAXIMUM FIRST HOLE |
| SPECIFICATION/STANDARD DATA | 80205-NAS147 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| WIDTH ACROSS FLATS | 0.375 INCHES MINIMUM AND 0.378 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.788 INCHES MINIMUM AND 0.838 INCHES MAXIMUM |
| THREAD QUANTITY PER INCH | 20 |
| THREAD SERIES DESIGNATOR | UNJF |