| FASTENER LENGTH | 1.190 INCHES NOMINAL |
| MATERIAL | STEEL COMP 4140 OR |
| STEEL COMP 8740 OR |
| STEEL COMP 8630 OR |
| STEEL COMP 8735 OR |
| STEEL COMP 4130 OR |
| STEEL COMP 4037 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR |
| MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR |
| MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OR |
| MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR |
| MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OR |
| AMS 6300 ASSN STD 6TH MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM AND |
| CHROMATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY2 CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND |
| 32.0 ROCKWELL C MAXIMUM OVERALL |
| MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| STYLE DESIGNATOR | ROUND, CLOSED W/SHOULDER |
| EYE INSIDE DIAMETER | 0.375 INCHES MINIMUM AND |
| 0.378 INCHES MAXIMUM |
| SHOULDER THICKNESS | 0.094 INCHES NOMINAL |
| SHANK LENGTH | 1.190 INCHES NOMINAL |
| EYE STOCK THICKNESS | 0.183 INCHES MINIMUM AND |
| 0.193 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.750 INCHES NOMINAL |
| SHANK DIAMETER | 0.371 INCHES MINIMUM AND |
| 0.374 INCHES MAXIMUM |
| OVERALL LENGTH | 2.159 INCHES NOMINAL |
| DISTANCE FROM CENTER OF EYE TO SHANK END | 1.784 INCHES NOMINAL |
| EYE OUTSIDE WIDTH | 0.750 INCHES NOMINAL |
| SPECIAL FEATURES | DRILLED HOLE 0.106 IN. DIA 1.070 IN. FROM BEARING SURFACE OF EYE |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 89446 |
| DESIGN CONTROL REFERENCE | 8B340208-3 |