5306-01-207-8610, BOLT,MACHINE

National Stock Number:
5306-01-207-8610

Federal Supply Class:
5306

National Item Identification Number:
012078610

Description:
BOLT,MACHINE

Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.

Manufacturer Information:

MS9687-07	0U583	SAE INTERNATIONAL
MS9687-07	81343	SOCIETY OF AUTOMOTIVE ENGINEERS INC
MS9687-07	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

FASTENER LENGTH	0.688 INCHES NOMINAL
GRIP LENGTH	0.088 INCHES MINIMUM AND 0.108 INCHES MAXIMUM
HARDNESS RATING	42.0 ROCKWELL C MINIMUM AND 46.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.182 INCHES MINIMUM AND 0.198 INCHES MAXIMUM
HEAD STYLE	HEXAGON
HOLE CONFIGURATION STYLE	HEXAGON FLATS
HOLE DIAMETER	0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM
HOLE QUANTITY	1
HOLE TYPE	DRILLED
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6304 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL OVERALL
NOMINAL THREAD DIAMETER	0.3125 INCHES
SPECIFICATION/STANDARD DATA	96906-MS9687 GOVERNMENT STANDARD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	AMS 2416 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.580 INCHES MINIMUM AND 0.600 INCHES MAXIMUM
THREAD QUANTITY PER INCH	24
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
WIDTH BETWEEN FLATS	0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM

Click here to Register for Free 30-day Trial