5306-01-349-9530, BOLT,SHEAR

National Stock Number:
5306-01-349-9530

Federal Supply Class:
5306

National Item Identification Number:
013499530

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

LM-211-106	0UCY9	M.S. AEROSPACE INC.
LM-211-106	76005	LORD CORPORATION

Techincal Specification:

FASTENER LENGTH	1.470 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
GRIP DIAMETER	0.4985 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM
GRIP LENGTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HARDNESS RATING	36.0 ROCKWELL C MINIMUM OVERALL AND 39.5 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.350 INCHES MINIMUM AND 0.365 INCHES MAXIMUM
HEAD STYLE	DISHED HEXAGON
HOLE CONFIGURATION STYLE	HEXAGON CORNERS
HOLE DIAMETER	0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HOLE QUANTITY	3
HOLE TYPE	DRILLED
LOCKING FEATURE	PELLET THREADS OR STRIP THREADS OR PATCH THREADS
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE FASTENER OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE FASTENER
MATERIAL	PLASTIC POLYAMIDE LOCKING FEATURESTEEL COMP E4340 FASTENER OR STEEL COMP 8740 FASTENER
PROPRIETARY CHARACTERISTICS	PACS
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.500 INCHES
WIDTH BETWEEN FLATS	0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
SURFACE TREATMENT	CADMIUM FASTENER AND CHROMATE FASTENER
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.985 INCHES NOMINAL
THREAD QUANTITY PER INCH	20
THREAD SERIES DESIGNATOR	UNJF

Click here to Register for Free 30-day Trial