|
|
|
National Stock Number:
5306-01-599-4530
Federal Supply Class:
5306
National Item Identification Number:
015994530
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 3M1277 | 76301 | THE BOEING COMPANY | | 3M1277E3D2A | 06725 | SPS TECHNOLOGIES, LLC | | 3M1277E3D2A | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | 3M1277E3D2A | 0PTK6 | SPS TECHNOLOGIES INC | | 3M1277E3D2A | 1EM77 | B & B SPECIALTIES INC | | 3M1277E3D2A | 27624 | SPS TECHNOLOGIES LLC | | 3M1277E3D2A | 50879 | PERTH METAL INDUSTRIES LTD | | 3M1277E3D2A | 73197 | HI-SHEAR CORPORATION | | 3M1277E3D2A | 76301 | THE BOEING COMPANY | | 3M1277E3D2A | 80539 | SPS TECHNOLOGIES, LLC | | 3M1277E3D2A | D1579 | F. W. BREITHAUPT & SOHN GMBH & CO.KG |
|
Techincal Specification:
| COUNTERSINK ANGLE | 90.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 0.470 INCHES NOMINAL | | GRIP LENGTH | 0.125 INCHES NOMINAL | | GRIP DIAMETER | 0.2021 INCHES MINIMUM AND 0.2026 INCHES MAXIMUM | | HEAD DIAMETER | 0.2931 INCHES MINIMUM AND 0.3016 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | HOLE CONFIGURATION STYLE | ROUND | | HOLE DIAMETER | 0.070 INCHES NOMINAL | | HOLE QUANTITY | 1 | | HOLE TYPE | DRILLED | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.345 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) | | THREAD QUANTITY PER INCH | 32 |
|
|