|
|
|
National Stock Number:
5306-01-604-6700
Federal Supply Class:
5306
National Item Identification Number:
016046700
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| NAS6705DU23 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.312 INCHES | | THREAD QUANTITY PER INCH | 24 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.469 INCHES NOMINAL | | FASTENER LENGTH | 1.907 INCHES NOMINAL | | MATERIAL | IRON ALLOY 660 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OR | | AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OR | | AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OR | | AMS 5853 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2700, METHOD 1, TYPE 2 OR 8, CLASS 1 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | HEAD STYLE | HEXAGON | | HEAD HEIGHT | 0.156 INCHES NOMINAL | | WIDTH BETWEEN FLATS | 0.492 INCHES MINIMUM AND | | 0.502 INCHES MAXIMUM | | HOLE CONFIGURATION STYLE | HEXAGON CORNERS | | HOLE TYPE | DRILLED | | HOLE QUANTITY | 1 | | HOLE DIAMETER | 0.076 INCHES NOMINAL | | GRIP LENGTH | 1.438 INCHES NOMINAL | | GRIP DIAMETER | 0.3115 INCHES MINIMUM AND | | 0.3120 INCHES MAXIMUM | | POINT STYLE | FLAT | | POINT DIAMETER | 0.302 INCHES MINIMUM AND | | 0.306 INCHES MAXIMUM |
|
|