|
|
|
National Stock Number:
5307-00-533-9933
Federal Supply Class:
5307
National Item Identification Number:
005339933
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 393071 | 06848 | HONEYWELL INTERNATIONAL INC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 8630 OR | | STEEL COMP 8740 | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | OVERALL LENGTH | 1.312 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | UNF STUD THREAD | | NOMINAL THREAD SIZE | 0.312 INCHES NUT THREAD | | 0.312 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | 3A STUD THREAD | | THREAD QUANTITY PER INCH | 18 NUT THREAD | | 24 STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.650 INCHES MINIMUM AND | | 0.680 INCHES MAXIMUM NUT THREAD | | 0.500 INCHES NOMINAL STUD THREAD | | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM | | SURFACE FINISH | 100.0 MICROINCHES OVERALL |
|
|