|
|
|
National Stock Number:
5307-00-550-4001
Federal Supply Class:
5307
National Item Identification Number:
005504001
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 48-431-621-4 | 80070 | LOCKHEED MARTIN CORPORATION | | 48-431-621-4 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| MATERIAL | STEEL COMP E4340 OR | | STEEL COMP 4340 | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC ALL MATERIAL RESPONSES | | SURFACE TREATMENT | CADMIUM OVERALL | | OVERALL LENGTH | 1.516 INCHES MINIMUM AND | | 1.546 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNS STUD THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | 0.250 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD | | 20 STUD THREAD | | THREAD PITCH DIAMETERS | 0.2282 TO 0.2294 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.726 INCHES MAXIMUM NUT THREAD | | 0.787 INCHES MAXIMUM STUD THREAD | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 97499 | | DESIGN CONTROL REFERENCE | 48-431-621-4 |
|