|
|
|
National Stock Number:
5307-01-546-5870
Federal Supply Class:
5307
National Item Identification Number:
015465870
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 120-161P22M | 97499 | BELL TEXTRON INC | | 20-161P22M | 0K6Z0 | SATURN FASTENERS INC | | 20-161P22M | 0UCY9 | M.S. AEROSPACE INC. | | 20-161P22M | 17328 | UNITED PRECISION PRODUCTS CO., INC. | | 20-161P22M | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4140 OR | | STEEL COMP 4340 OR | | STEEL COMP 8740 | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL STD 1ST MATERIAL RESPONSE OR | | MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR | | MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TYPE 2, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | OVERALL LENGTH | 1.365 INCHES MINIMUM AND | | 1.385 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJS NUT THREAD A | | UNJF NUT THREAD B | | THREAD DIRECTION | RIGHT-HAND NUT THREAD A | | RIGHT-HAND NUT THREAD B | | THREAD LENGTH | 0.688 INCHES NOMINAL NUT THREAD A | | 0.562 INCHES NOMINAL NUT THREAD B | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 97499 | | MFR SOURCE CONTROLLING REFERENCE | 120-161P22M |
|
|