|
|
|
National Stock Number:
5310-00-010-8234
Federal Supply Class:
5310
National Item Identification Number:
000108234
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 99867-85 | 2Y133 | EAGLE AVIATION AND MFG CORP | | 99867-85 | 59364 | HONEYWELL INTERNATIONAL INC. | | 99867-85 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.385 INCHES MINIMUM AND 0.391 INCHES MAXIMUM | | OVERALL DIAMETER | 0.560 INCHES MINIMUM AND 0.590 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5542 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | NICKEL ALLOY X-750 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.023 INCHES MINIMUM AND 0.024 INCHES MAXIMUM |
|
|