|
|
|
National Stock Number:
5310-00-022-1117
Federal Supply Class:
5310
National Item Identification Number:
000221117
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| 221117 | 21450 | ARMY WEAPONS COMMAND ATTN AMSWE-REE-S | | 221117 | 24617 | GENERAL MOTORS CORP | | 221117 | 7X677 | GENERAL MOTORS LLC | | 5310000221117 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5310000221117 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 693348 | 3B4M0 | LUCENT TECHNOLOGIES INC CORPORATE HEADQUARTERS | | 693348 | 70408 | AT AND T CORP | | CPP2028A001-2B1 | 09017 | EDO | | FFW100 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS35333-103 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS35333-103 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | N02BR0NZEG0LD | 13923 | L3 TECHNOLOGIES, INC. |
|
Techincal Specification:
| HOLE DIAMETER | 0.089 INCHES MINIMUM AND 0.095 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.175 INCHES MINIMUM AND 0.200 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-750 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.010 INCHES MINIMUM AND 0.015 INCHES MAXIMUM | | MATERIAL | COPPER ALLOY OVERALL | | NONDEFINITIVE SPEC/STD DATA | A TYPE | | STYLE DESIGNATOR | FLAT INTERNAL TEETH |
|