|
|
|
National Stock Number:
5310-00-359-1040
Federal Supply Class:
5310
National Item Identification Number:
003591040
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 2250524 | 23862 | MILITARY VEHICLES OPN GENERAL MOTORS TRUCK AND BUS GROUP MS 2603-02 | | 2250524 | 7X677 | GENERAL MOTORS LLC | | 374166 | 23926 | KOMATSU AMERICA INTL CO | | 58182R1 | 89346 | NAVISTAR INTL CORP TRUCK BR OHIO PLANT | | B262204 | F0134 | HONEYWELL AFTERMARKET EUROPE | | 262204 | F0134 | HONEYWELL AFTERMARKET EUROPE |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.771 INCHES MINIMUM AND 0.791 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1010 OVERALL | | OVERALL DIAMETER | 1.053 INCHES MINIMUM AND 1.058 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.0299 INCHES MINIMUM AND 0.0359 INCHES MAXIMUM |
|
|