| LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| THREAD DIRECTION | RIGHT-HAND |
| NUT STYLE | PLATE |
| MATERIAL | STEEL CORROSION RESISTING LOCKING INSERT |
| ALUMINUM ALLOY 2014 NUT |
| THREAD SERIES | UNF |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| THREAD QUANTITY PER INCH | 32 |
| THREAD CLASS | 2B |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 7245 ASSN STD SINGLE MATERIAL RESPONSE LOCKING INSERT |
| QQ-A-367 FED SPEC SINGLE MATERIAL RESPONSE NUT |
| SURFACE TREATMENT | OXIDE FILM NUT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE NUT |
| NUT LENGTH | 1.300 INCHES MINIMUM AND |
| 1.420 INCHES MAXIMUM |
| DISTANCE FROM BASE TO CENTER OF APERTURE | 0.290 INCHES MINIMUM AND |
| 0.330 INCHES MAXIMUM |
| NUT HEIGHT | 0.710 INCHES MINIMUM AND |
| 0.770 INCHES MAXIMUM |
| PLATE THICKNESS | 0.040 INCHES MINIMUM AND |
| 0.060 INCHES MAXIMUM |
| PLATE WIDTH | 1.460 INCHES MINIMUM AND |
| 1.570 INCHES MAXIMUM |
| NUT MOUNTING PROVISION | STRAIGHT HOLES |
| MOUNTING HOLE ARRANGEMENT STYLE | 3 HOLES |
| MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND |
| 0.103 INCHES MAXIMUM |
| DISTANCE FROM MOUNTING HOLE CENTER TO BASE | 0.230 INCHES MINIMUM AND |
| 0.270 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 1.000 INCHES MINIMUM AND |
| 1.030 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.540 INCHES MINIMUM AND |
| 0.580 INCHES MAXIMUM |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 04169 |
| DESIGN CONTROL REFERENCE | WSI333-3 |