5310-00-543-4385, WASHER,LOCK

National Stock Number:
5310-00-543-4385

Federal Supply Class:
5310

National Item Identification Number:
005434385

Description:
WASHER,LOCK

Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces

Manufacturer Information:

0714285	S3002	GENERAL DYNAMICS EUROPEAN LAND SYSTEMS - MOWAG GMBH
12387269-46	19207	U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
535-1228CP	06840	BENDIX CORP THE
535-1228CP	19315	HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX NAVIGATION AND CONTROL SYSTEMS
5310PL0924112	9009H	INSPEKTORAT WSPARCIA SIL ZBROJNYCH
5310005434385	SCY13	E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
900609-11	32537	JOY GLOBAL UNDERGROUND MINING LLC
535-1228CP	55972	HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS
900609-11	83179	JOY MFG CO AIR POWER GROUP MICHIGAN CITY PLANT
70034-46	95097	LITTLE GIANT CRANE AND SHOVEL INC
60005-15	97381	CROWN CONTROLS CORP
535-1228CP	99551	GOODRICH CORPORATION
AU29AR-331	D9182	ZF INDUSTRIEANTRIEBE WITTEN GMBH
AU29AR-331-012	D9182	ZF INDUSTRIEANTRIEBE WITTEN GMBH
EE38726	45152	OSHKOSH CORP
EE38726	75Q65	OSHKOSH DEFENSE LLC
FF-W-100	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MS35333-46	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

MATERIAL	STEEL COMP 1050 OR
	STEEL COMP 1551 OR
	STEEL COMP 1059 OR
	STEEL COMP 1060 OR
	STEEL COMP 1561 OR
	STEEL COMP 1064 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD ALL MATERIAL RESPONSES OVERALL
SURFACE TREATMENT	CADMIUM AND
	CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING	40.0 ROCKWELL C MINIMUM AND
	50.0 ROCKWELL C MAXIMUM
STYLE DESIGNATOR	FLAT INTERNAL TEETH
HOLE DIAMETER	0.640 INCHES MINIMUM AND
	0.663 INCHES MAXIMUM
OUTSIDE DIAMETER	1.045 INCHES MINIMUM AND
	1.071 INCHES MAXIMUM
MATERIAL THICKNESS	0.042 INCHES MINIMUM AND
	0.050 INCHES MAXIMUM
NONDEFINITIVE SPEC/STD DATA	1 TYPE AND
	A GRADE AND
	1 STYLE AND
	1 COMPOSITION
SPEC/STD CONTROLLING DATA
MANUFACTURERS CODE	81348
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE	FF-W-100
MANUFACTURERS CODE	96906
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE	MS35333-46

Click here to Register for Free 30-day Trial