| MATERIAL | ALUMINUM ALLOY 5052 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8,ALLOY 5052,H32 FED SPEC 1ST MATERIAL RESPONSE OR |
| QQ-A-250/8,H34 FED SPEC 2ND MATERIAL RESPONSE OR |
| QQ-B-250/8,H36 FED SPEC 3RD MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | ANODIZE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| NUT STYLE | PLATE NUT SPACER |
| NUT LENGTH | 1.266 INCHES MINIMUM AND |
| 1.296 INCHES MAXIMUM |
| THRU-HOLE DIAMETER | 0.322 INCHES MINIMUM AND |
| 0.332 INCHES MAXIMUM |
| PLATE THICKNESS | 0.059 INCHES MINIMUM AND |
| 0.067 INCHES MAXIMUM |
| PLATE WIDTH | 0.485 INCHES MINIMUM AND |
| 0.515 INCHES MAXIMUM |
| NUT MOUNTING PROVISION | COUNTERSUNK HOLES |
| MOUNTING HOLE COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| MOUNTING PROVISION LOCATION | NUT PROJECTION SIDE |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE DIAMETER | 0.102 INCHES MINIMUM AND |
| 0.108 INCHES MAXIMUM |
| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.497 INCHES MINIMUM AND |
| 0.503 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.998 INCHES MINIMUM AND |
| 1.002 INCHES MAXIMUM |
| SPECIFICATION/STANDARD DATA | 80205-NAS463 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |