|
|
|
National Stock Number:
5310-00-551-5844
Federal Supply Class:
5310
National Item Identification Number:
005515844
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 99867-1 | 2N935 | BOEING DISTRIBUTION SERVICES X, INC. | | 99867-1 | 59364 | HONEYWELL INTERNATIONAL INC. | | 99867-1 | 70210 | HONEYWELL INTERNATIONAL INC. | | 99867-1 | 72599 | ALLIEDSIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO | | 99867-1 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| MATERIAL | NICKEL ALLOY X-750 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5542 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.391 INCHES NOMINAL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.590 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.020 INCHES NOMINAL | | HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND | | 37.0 ROCKWELL C MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 59364 | | DESIGN CONTROL REFERENCE | 99867-1 |
|
|