| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.341 INCHES MINIMUM AND 0.347 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6721 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5059 MIL SPEC 2ND MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL CORROSION RESISTING OR STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 316 OVERALL |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| MOUNTING HOLE DIAMETER | 0.102 INCHES MINIMUM AND 0.108 INCHES MAXIMUM |
| MOUNTING PROVISION LOCATION | NUT PROJECTION SIDE |
| NUT MOUNTING PROVISION | COUNTERSUNK HOLES |
| NUT STYLE | PLATE NUT SPACER |
| NUT LENGTH | 0.954 INCHES MINIMUM AND 0.984 INCHES MAXIMUM |
| PLATE THICKNESS | 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| PLATE WIDTH | 0.391 INCHES MINIMUM AND 0.421 INCHES MAXIMUM |
| SPECIFICATION/STANDARD DATA | 80205-NAS463 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| THRU-HOLE DIAMETER | 0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |