|
|
|
National Stock Number:
5310-00-558-6898
Federal Supply Class:
5310
National Item Identification Number:
005586898
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 0187-0125-016-3302-PA | 84479 | H. K. METAL CRAFT MANUFACTURING CORPORATION | | 125-187-016 | 85446 | BOKERS INC | | 163-24 | 13539 | C & H HYDRAULICS, INC | | 163-24 | 6N016 | C&H HYDRAULICS INC | | 2595545-1 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 58188-2 | 04454 | SENSOR SYSTEMS, L.L.C. | | 759-006-052 | 26055 | PARKER-HANNIFIN CORPORATION | | 759-006-052 | 59211 | PARKER-HANNIFIN CORPORATION | | B20156 | 77164 | INVENTIVE MACHINE CORP | | B20156 | 77264 | PHOENIX SPECIALTY MFG CO INC | | WFW-SS-0125-5-0182-0144 | 84992 | INDUSTRIAL FASTENERS CORP |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.128 INCHES MINIMUM AND 0.131 INCHES MAXIMUM | | OVERALL DIAMETER | 0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 302 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.014 INCHES MINIMUM AND 0.018 INCHES MAXIMUM |
|
|