|
|
|
National Stock Number:
5310-00-564-1696
Federal Supply Class:
5310
National Item Identification Number:
005641696
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 9400585P1 | 01288 | GENERAL ELECTRIC CO DIRECT CURRENT MOTOR AND GENERATOR DEPT | | 9400585P1 | 07639 | GE AVIATION SYSTEMS LLC | | 9400585P1 | 24446 | GENERAL ELECTRIC COMPANY | | 9400585P1 | 30221 | GENERAL ELECTRIC CO ARMAMENT AND ELECTRICAL SYSTEMS DEPT ELECTRICAL SYSTEMS PRODUCTS DEPT |
|
Techincal Specification:
| MATERIAL THICKNESS | 0.054 INCHES MINIMUM AND 0.062 INCHES MAXIMUM | | MATERIAL | STEEL COMP 347 OVERALL | | RECESS ANGLE | 45.0 DEGREES NOMINAL | | RECESS DIAMETER | 0.421 INCHES MINIMUM AND 0.426 INCHES MAXIMUM | | STYLE DESIGNATOR | RECESSED | | HOLE DIAMETER | 0.359 INCHES MINIMUM AND 0.364 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.516 INCHES MINIMUM AND 0.547 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
|
|