|
|
|
National Stock Number:
5310-00-565-4767
Federal Supply Class:
5310
National Item Identification Number:
005654767
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| S8154-161C016 | 70210 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| OVERALL DIAMETER | 1.013 INCHES MINIMUM AND 1.023 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059,1/4 HARD OR 1/2 HARD OR HARD MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5059,1/4 HARD,FINISH 2B MIL SPEC 2ND MATERIAL RESPONSE OR QQ-S-764 FED SPEC 3RD MATERIAL RESPONSE OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | SPECIFICATION/STANDARD DATA | 70210-S8154 MANUFACTURERS STANDARD | | THICKNESS | 0.014 INCHES MINIMUM AND 0.018 INCHES MAXIMUM |
|
|