|
|
|
National Stock Number:
5310-00-579-3478
Federal Supply Class:
5310
National Item Identification Number:
005793478
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| FFW100 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC |
|
Techincal Specification:
| DEPARTURE FROM CITED DOCUMENT | AS MOD BY MATERIAL | | HOLE DIAMETER | 0.168 INCHES MINIMUM AND 0.176 INCHES MAXIMUM | | NONDEFINITIVE SPEC/STD DATA | 2 TYPE AND 1 STYLE | | OUTSIDE DIAMETER | 0.365 INCHES MINIMUM AND 0.381 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-591,ALLOY 655 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.018 INCHES MINIMUM AND 0.023 INCHES MAXIMUM | | MATERIAL | COPPER ALLOY 655 OVERALL | | TEST DATA DOCUMENT | 81348-FFW100 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | STYLE DESIGNATOR | FLAT EXTERNAL TEETH |
|
|