|
|
|
National Stock Number:
5310-00-579-5192
Federal Supply Class:
5310
National Item Identification Number:
005795192
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 1489212-0005 | 55972 | HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS | | 4136042PC354 | 29834 | GENERAL ELECTRIC CO INSTRUMENT PRODUCTS SECTION | | SWSS0605-02RR | 19315 | HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX NAVIGATION AND CONTROL SYSTEMS | | SWSS0605-02RR | 55972 | HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS | | SBA.42/2 | K5294 | GE AVIATION SYSTEMS LIMITED |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 94.0 ROCKWELL B NOMINAL | | HOLE DIAMETER | 0.09375 INCHES MINIMUM AND 0.09875 INCHES MAXIMUM | | OVERALL DIAMETER | 0.15625 INCHES MINIMUM AND 0.16125 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP C2 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.017 INCHES MINIMUM AND 0.023 INCHES MAXIMUM |
|