| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.555 INCHES MINIMUM AND 0.565 INCHES MAXIMUM |
| DISTANCE FROM BASE TO CENTER OF APERTURE | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 7245 ASSN STD SINGLE MATERIAL RESPONSE LOCKING INSERT |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-367,TEMPER T6 FED SPEC SINGLE MATERIAL RESPONSE NUT |
| MATERIAL | ALUMINUM ALLOY 2219 NUT |
| MATERIAL | STEEL CORROSION RESISTING LOCKING INSERT |
| MOUNTING HOLE ARRANGEMENT STYLE | 3 HOLES |
| MOUNTING HOLE DIAMETER | 0.123 INCHES MINIMUM AND 0.133 INCHES MAXIMUM |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| NUT LENGTH | 1.360 INCHES MINIMUM AND 1.380 INCHES MAXIMUM |
| NUT MOUNTING PROVISION | STRAIGHT HOLES |
| NUT STYLE | PLATE |
| PLATE THICKNESS | 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| PLATE WIDTH | 1.570 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL EXCEPT INSERT |
| SURFACE TREATMENT | CHROMATE OVERALL EXCEPT INSERT |
| TEMP RATING | 350.0 FAHRENHEIT NOMINAL |
| THREAD CLASS | 2B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES | UNF |
| THREAD QUANTITY PER INCH | 32 |