|
|
|
National Stock Number:
5310-00-939-1063
Federal Supply Class:
5310
National Item Identification Number:
009391063
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| 2151200108 | 57057 | NAVCOM DEFENSE ELECTRONICS, INC. | | 300-2126 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 373-7010-000 | 13499 | ROCKWELL COLLINS, INC. | | AN936B4B | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | | MS35335-71 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 5310009391063 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | MS35335-85 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| HARDNESS RATING | 89.0 ROCKWELL B MINIMUM AND 94.0 ROCKWELL B MAXIMUM | | HOLE DIAMETER | 0.115 INCHES MINIMUM AND 0.123 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | | | MATERIAL THICKNESS | 0.015 INCHES MINIMUM AND 0.019 INCHES MAXIMUM | | MATERIAL | | | NONDEFINITIVE SPEC/STD DATA | 2 TYPE AND 1 STYLE AND A GRADE AND 3 OR 4 COMPOSITION | | OUTSIDE DIAMETER | 0.245 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | STYLE DESIGNATOR | FLAT EXTERNAL TEETH |
|