|
|
|
National Stock Number:
5310-01-037-8172
Federal Supply Class:
5310
National Item Identification Number:
010378172
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 364030-1 | 59364 | HONEYWELL INTERNATIONAL INC. | | 364030-1 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4340 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 50.0 ROCKWELL C MINIMUM AND | | 54.0 ROCKWELL C MAXIMUM | | STYLE DESIGNATOR | RECESSED | | HOLE DIAMETER | 0.322 INCHES MINIMUM AND | | 0.325 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.430 INCHES MINIMUM AND | | 0.435 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.048 INCHES MINIMUM AND | | 0.052 INCHES MAXIMUM | | RECESS ANGLE | 80.0 DEGREES MINIMUM AND | | 100.0 DEGREES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 59364 | | DESIGN CONTROL REFERENCE | 364030-1 |
|
|