|
|
|
National Stock Number:
5310-01-556-6501
Federal Supply Class:
5310
National Item Identification Number:
015566501
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10039410 | 61C19 | MIL-COTS CORPORATION | | 25846R1 | 338X5 | ND DEFENSE LLC | | 33816 | 0Y3H3 | FASTENAL COMPANY | | 390306C1 | 338X5 | ND DEFENSE LLC | | 25846R1 | 5F5P2 | ASF LOGISTICS, LLC | | 25846R1 | Z0009 | INTERNATIONAL TRUCKS AUSTRALIALIMITED | | 5320000055-00 | 338X5 | ND DEFENSE LLC | | ESP-F-16.101-GS | 338X5 | ND DEFENSE LLC | | ESP-F-16.221-NPP | 338X5 | ND DEFENSE LLC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.469 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | CEMS-A-0, PART I, 1040 TO 1065 MFR REF ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL OVERALL | | III PART NAME ASSIGNED BY CONTROLLING AGENCY | WASHER,FLAT 7/16 | | PERIPHERAL SHAPE STYLE | ROUND | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL DIAMETER | 0.922 INCHES NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | CEMS G-20, CLASS 6A MFR REF SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ZINC OVERALL | | THICKNESS | 0.065 INCHES NOMINAL |
|
|