|
|
|
National Stock Number:
5315-00-401-5013
Federal Supply Class:
5315
National Item Identification Number:
004015013
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 6868069 | 63005 | ROLLS-ROYCE CORPORATION | | 6868069 | 73342 | ALLISON TRANSMISSION INC |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.444 INCHES MINIMUM AND 0.448 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.698 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST HOLE DIAMETER | 0.104 INCHES MINIMUM AND 0.112 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | AAMS 5069 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1018 OVERALL | | PIN OVERALL DIAMETER | 0.8570 INCHES MINIMUM AND 0.8590 INCHES MAXIMUM | | PIN OVERALL LENGTH | 3.590 INCHES NOMINAL | | PROPRIETARY CHARACTERISTICS | PACS | | SECOND HOLE DIAMETER | 0.104 INCHES MINIMUM AND 0.112 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD 1ST TREATMENT RESPONSE OVERALL AND AMS 2402 ASSN STD 2ND TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL OR ZINC OVERALL |
|
|