| CHAMFER LENGTH | 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| CRITICALITY CODE JUSTIFICATION | ABMZ |
| DIAMETER | 0.246 INCHES MINIMUM AND 0.248 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.080 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| FIRST HOLE DIAMETER | 0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| HARDNESS RATING | |
| HEAD STYLE | FLAT |
| HEIGHT | 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| PIN CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| PIN HEAD DIAMETER | 0.360 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| MATERIAL | STEEL COMP 4140 OVERALL |
| STYLE DESIGNATOR | STRAIGHT |
| SURFACE FINISH | 125.0 MICROINCHES OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| UNDER HEAD LENGTH | 0.680 INCHES MINIMUM AND 0.710 INCHES MAXIMUM |