|
|
|
National Stock Number:
5315-00-500-2202
Federal Supply Class:
5315
National Item Identification Number:
005002202
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 5002202 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE | | 5315-500-2202 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5315005002202 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5315005002202 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 5315-500-2202 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | SURFACE TREATMENT | PHOSPHATE MANGANESE OR | | PHOSPHATE ZINC OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-16232,TY M CL 1 MIL SPEC 1ST TREATMENT RESPONSE OR | | MIL-P-16232,TY Z CL 1 MIL SPEC 2ND TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 25.0 ROCKWELL C MINIMUM AND | | 30.0 ROCKWELL C MAXIMUM OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.031 INCHES MINIMUM AND | | 0.094 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 43.0 DEGREES MINIMUM AND | | 47.0 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.203 INCHES MINIMUM AND | | 0.219 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.203 INCHES MINIMUM AND | | 0.219 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.281 INCHES MINIMUM AND | | 0.344 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 3.219 INCHES MINIMUM AND | | 3.281 INCHES MAXIMUM | | PIN OVERALL LENGTH | 3.844 INCHES MINIMUM AND | | 3.906 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 1.1780 INCHES MINIMUM AND | | 1.1800 INCHES MAXIMUM |
|
|