5310-00-516-0002 WASHER,FLAT Index 3120-00-516-0010 BEARING,SLEEVE

National Stock Number:
5315-00-516-0004

Federal Supply Class:
5315

National Item Identification Number:
005160004

Description:
PIN,STRAIGHT,HEADED

Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.


Manufacturer Information:
516000419204ARMY, UNITED STATES DEPARTMENT OF THE
5315-516-0004A00AME.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE
5315005160004A00AME.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE
XX002-1629H2229RDM TECHNOLOGY B.V.
5315-516-0004SCY13E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
5315005160004SCY13E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE


Techincal Specification:
CHAMFER LENGTH0.047 INCHES MINIMUM AND 0.078 INCHES MAXIMUM
DIAMETER0.430 INCHES MINIMUM AND 0.435 INCHES MAXIMUM
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM
FIRST HOLE DIAMETER0.135 INCHES MINIMUM AND 0.145 INCHES MAXIMUM
HEAD STYLEFLAT
HEIGHT0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM
HOLE ARRANGEMENT STYLEONE END DRILLED
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A400 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
PIN CHAMFER ANGLE44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM
PIN HEAD DIAMETER0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM
MATERIALSTEEL OVERALL
STYLE DESIGNATORSTRAIGHT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-P-16232 TY MCL 1 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-P-16232 TY Z CL 1 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPHOSPHATE MANGANESE OR PHOSPHATE ZINC OVERALL
UNDER HEAD LENGTH3.766 INCHES MINIMUM AND 3.797 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us