|
|
|
National Stock Number:
5315-00-531-2140
Federal Supply Class:
5315
National Item Identification Number:
005312140
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| P1454 | 22888 | FMC CORP | | P1454 | 80212 | BAE SYSTEMS LAND & ARMAMENTS L.P. |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | SURFACE TREATMENT | PHOSPHATE OVERALL | | STYLE DESIGNATOR | SHOULDER | | SHANK LENGTH | 2.109 INCHES MINIMUM AND | | 2.141 INCHES MAXIMUM | | SHOULDER DIAMETER | 0.557 INCHES MINIMUM AND | | 0.559 INCHES MAXIMUM | | SHANK DIAMETER | 0.3695 INCHES MINIMUM AND | | 0.3715 INCHES MAXIMUM | | OVERALL LENGTH | 3.547 INCHES MINIMUM AND | | 3.578 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER LENGTH | 0.250 INCHES NOMINAL | | SECOND END TAPER ANGLE | 30.0 DEGREES NOMINAL | | FIRST END LOCATION | SHANK END | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.1825 INCHES MINIMUM AND | | 0.1840 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.234 INCHES MINIMUM AND | | 0.266 INCHES MAXIMUM |
|
|