|
|
|
National Stock Number:
5315-00-543-3507
Federal Supply Class:
5315
National Item Identification Number:
005433507
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 9088950 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 5.070 INCHES MINIMUM AND 5.110 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.790 INCHES MINIMUM AND 0.830 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.066 INCHES MINIMUM AND 0.086 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 44.5 DEGREES MINIMUM AND 45.5 DEGREES MAXIMUM | | FIRST END TAPER LENGTH | 0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | PIN OVERALL DIAMETER | 0.2450 INCHES MINIMUM AND 0.2550 INCHES MAXIMUM | | PIN OVERALL LENGTH | 6.670 INCHES MINIMUM AND 6.750 INCHES MAXIMUM | | MATERIAL | STEEL COMP 303 OVERALL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 0.066 INCHES MINIMUM AND 0.086 INCHES MAXIMUM |
|
|