| CHAMFER LENGTH | 0.016 INCHES MINIMUM AND 0.078 INCHES MAXIMUM |
| DIAMETER | 0.186 INCHES MINIMUM AND 0.188 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| FIRST HOLE DIAMETER | 0.031 INCHES MINIMUM AND 0.094 INCHES MAXIMUM |
| HARDNESS RATING | 34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD STYLE | FLAT |
| HEIGHT | 0.016 INCHES MINIMUM AND 0.078 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6300 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 4037 OR STEEL COMP 4130 OVERALL |
| PIN CHAMFER ANGLE | 15.0 DEGREES NOMINAL |
| PIN HEAD DIAMETER | 0.281 INCHES MINIMUM AND 0.344 INCHES MAXIMUM |
| STYLE DESIGNATOR | STRAIGHT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC ALL TREATMENT RESPONSES OVERALL |
| SURFACE TREATMENT | CADMIUM OR CADMIUM AND CHROMATE OR CADMIUM AND PHOSPHATE OVERALL |
| UNDER HEAD LENGTH | 1.047 INCHES MINIMUM AND 1.109 INCHES MAXIMUM |