| CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.960 INCHES MINIMUM AND 2.040 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.340 INCHES MINIMUM AND 0.420 INCHES MAXIMUM |
| FIRST HOLE DIAMETER | 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 44.5 DEGREES MINIMUM AND 45.5 DEGREES MAXIMUM |
| FIRST END TAPER LENGTH | 0.020 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 4130 OVERALL |
| PIN OVERALL LENGTH | 2.720 INCHES MINIMUM AND 2.800 INCHES MAXIMUM |
| PIN OVERALL DIAMETER | 0.7450 INCHES MINIMUM AND 0.7470 INCHES MAXIMUM |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| SECOND HOLE DIAMETER | 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM |
| SURFACE FINISH | 125.0 MICROINCHES OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |