| CHAMFER LENGTH | 0.037 INCHES MINIMUM AND 0.057 INCHES MAXIMUM |
| DIAMETER | 0.184 INCHES MINIMUM AND 0.186 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.071 INCHES MINIMUM AND 0.111 INCHES MAXIMUM |
| FIRST HOLE DIAMETER | 0.065 INCHES MINIMUM AND 0.072 INCHES MAXIMUM |
| HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD STYLE | FLAT |
| HEIGHT | 0.037 INCHES MINIMUM AND 0.057 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 8740 OVERALL |
| PIN CHAMFER ANGLE | 10.0 DEGREES MINIMUM AND 20.0 DEGREES MAXIMUM |
| PIN HEAD DIAMETER | 0.312 INCHES NOMINAL |
| STYLE DESIGNATOR | STRAIGHT |
| SURFACE FINISH | 63.0 MICROINCHES HEAD BEARING SURFACE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| UNDER HEAD LENGTH | 1.209 INCHES MINIMUM AND 1.229 INCHES MAXIMUM |