| ANGLE BETWEEN CENTERLINE OF HOLES | 45.0 DEGREES NOMINAL |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.375 INCHES NOMINAL |
| FIRST END LOCATION | CHAMFERED END |
| FIRST HOLE DIAMETER | 0.096 INCHES MINIMUM AND 0.099 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.062 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | ONE END W/TWO DRILLED HOLES |
| OVERALL LENGTH | 3.875 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CLASS 6,TYPE A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 416 OVERALL |
| SECOND END STYLE | SQUARE |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND HOLE DIAMETER | 0.2500 INCHES MINIMUM AND 0.2504 INCHES MAXIMUM |
| SHANK DIAMETER | 0.5613 INCHES MINIMUM AND 0.5619 INCHES MAXIMUM |
| SHANK LENGTH | 2.313 INCHES NOMINAL |
| SHOULDER DIAMETER | 0.7486 INCHES MINIMUM AND 0.7493 INCHES MAXIMUM |
| STYLE DESIGNATOR | SHOULDER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |