|
|
|
National Stock Number:
5315-00-564-6623
Federal Supply Class:
5315
National Item Identification Number:
005646623
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 0N009248 | 98230 | NATIONAL SECURITY AGENCY |
|
Techincal Specification:
| FIRST END LOCATION | SHANK END | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.005 INCHES NOMINAL | | OVERALL LENGTH | 0.750 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 303 OVERALL | | NOMINAL THREAD SIZE | 0.164 INCHES | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.025 INCHES MINIMUM AND 0.031 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND SHANK DIAMETER | 0.164 INCHES NOMINAL | | SECOND SHANK LENGTH | 0.229 INCHES NOMINAL | | SECOND UNDERCUT WIDTH | 0.031 INCHES NOMINAL | | SHANK DIAMETER | 0.146 INCHES MINIMUM AND 0.149 INCHES MAXIMUM | | SHANK LENGTH | 0.281 INCHES NOMINAL | | SHOULDER DIAMETER | 0.186 INCHES MINIMUM AND 0.187 INCHES MAXIMUM | | STYLE DESIGNATOR | UNDERCUT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.229 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNC | | UNDERCUT WIDTH | 0.031 INCHES NOMINAL | | UNDERCUT DIAMETER | 0.125 INCHES NOMINAL |
|
|