|
|
|
National Stock Number:
5315-00-582-3133
Federal Supply Class:
5315
National Item Identification Number:
005823133
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 20-32303-3 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.670 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.380 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.125 INCHES MINIMUM AND 0.129 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000,COND C MIL SPEC ALL MATERIAL RESPONSES OVERALL | | PIN OVERALL DIAMETER | 0.4950 INCHES MINIMUM AND 0.4980 INCHES MAXIMUM | | PIN OVERALL LENGTH | 4.140 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 0.125 INCHES MINIMUM AND 0.129 INCHES MAXIMUM | | SPECIAL FEATURES | HOLES DRILLED AT 90 DEG ANGLE ON CENTERLINE OF HOLES | | SURFACE FINISH | 250.0 MICROINCHES OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL |
|
|