|
|
|
National Stock Number:
5315-00-909-3026
Federal Supply Class:
5315
National Item Identification Number:
009093026
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 11699768 | 19200 | US ARMY ARDEC RDECOM | | 11699768 | 19205 | SPRINGFIELD ARMORY | | 5315009093026 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5315009093026 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND | | 45.0 ROCKWELL C MAXIMUM OVERALL | | STYLE DESIGNATOR | SHOULDER | | SHANK LENGTH | 0.070 INCHES NOMINAL | | SHOULDER DIAMETER | 0.245 INCHES MINIMUM AND | | 0.248 INCHES MAXIMUM | | SHANK DIAMETER | 0.120 INCHES MINIMUM AND | | 0.125 INCHES MAXIMUM | | OVERALL LENGTH | 0.810 INCHES MINIMUM AND | | 0.820 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.015 INCHES MINIMUM AND | | 0.020 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | SQUARE | | SECOND END TAPER LENGTH | 0.020 INCHES NOMINAL | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END LOCATION | SHANK END | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.127 INCHES MINIMUM AND | | 0.129 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.508 INCHES NOMINAL | | SURFACE FINISH | 125.000 MICROINCHES OVERALL | | CRITICALITY CODE JUSTIFICATION | AAVH AND | | AAZE AND | | ABRC | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 19200 | | DESIGN CONTROL REFERENCE | 11699768 |
|
|